Nyko Data Bank for PlayStation 4 – conveniently expand the PS4 internal
memory capacity by adding the 3.5" drive of your choice! Easily expand the
storage capacity of the PS4, to up to 8TB*, drastically increasing the amount of
games and save files that can be stored on the system.
The Data Bank for PS4 allows the use of a 3.5'' hard drive to be used as
internal storage instead of the stock 2.5'' hard drive that comes pre-installed
on the system. 3.5" drives are less expensive at higher capacities than the 2.5"
drive inherently supported by the PS4. Typically 3.5" hard drives have a higher
read/write speed than 2.5" hard drives, which may slightly improve load times in
many games.
The Data Bank also features a front facing LED indicator which illustrates
when the PlayStation 4 is accessing or saving content on the hard drive. The
Data Bank is powered by a built-in power pass-through cord so it does not
require its own power outlet.
- Easily upgrade the storage capacity of the PS4 up to 8TB*
- Uses any SATA 3 3.5'' hard drive instead of more expensive, slower
2.5" drives
- Save money and get more storage with a 3.5" hard drive over
2.5" drives
- The faster read/write speed of 3.5" hard drive may improve load times of
most games
- LED indicators illustrate when the PS4 is saving content or accessing the
hard drive.
- Power pass-through cord utilizes the standard PS4 power cord to power the
hard drive – * Does not require its own power outlet
- Modular – Compatible with other Nyko modular items for PS4
- See compatible
3.5 hard drives
Installing the Data Bank is easy and takes only a few minutes. After
backing up your saved data, simply remove the top cover of the PS4 and take out
the internal 2.5" hard drive by removing one screw via the included screw
driver. Slide the included Universal Cartridge into place, fasten it down with
the screw and then snap the Data Bank onto the top of the PS4. Once installed,
place a SATA 3 3.5" hard drive into the Data Bank and attach the cover. The last
step is to plug the power pass-through cord into the PS4 and then plug the PS4
power cord into the pass-through cord. Detailed instructions on how to back up
and transfer PS4 save files, Data Bank installation and how to initialize the
PS4 firmware on a new drive are included in the box.
*With the 3.50 firmware update for PS4 we recommend up to 4TB for models
below CUH-1200 and for models above CUH-1200, we recommend up to 8TB. Note: You
must be running PlayStation®4 firmware 3.50 or higher to use above mentioned
hard drive sizes.
Comes complete with universal cartridge for use with newer CUH-1200+ range
model PS4s.