UPGRADE YOUR GEAR – PREMIUM WIRELESS CONNECTION
Upgrade your home stereo with the W3 wireless audio adapter. Stream all your music wirelessly from any audio source, app or device to your powered speakers, stereo receiver, or powered subwoofer in CD-quality stereo sound.
W3 is a Sender/Receiver system, doesn’t need an app or network setup, has up to 100-foot range, and hifi stereo sound without dropouts or interference.
FEATURES
- Extended-Range Wireless
- USB Audio Input
- Analog Audio Output
- Plug & Play
- Compact Size
- WHY YOU'LL LOVE IT:
- Wireless that works
- Make any amplifier, turntable, powered speakers, or subwoofer wireless
- Plays all your music from any audio device, player or streaming app
- Easy setup, pre-paired, no network connection or password to enter
- Extended-range CD-quality stereo sound
- Place your subwoofer anywhere
- Add extra W3 receivers and stream music to up to 3 audio systems
- Plays all music formats from any media player
- Works with any product with an audio input or output
- Low-latency for seamless video sync
- Built-in audiophile DAC for USB computer connection
- 2.4 GHz wifi with dynamic channel selection
- SET UP IN SECONDS – SIMPLE. NO HASSLE. EASY TO USE.: The W3 adapter is a simple plug-and-play wireless audio solution. Ready to go, the W3 is paired right out of the box, so the Sender automatically finds the Receiver, making setup easy. Connect the W3 sender to any audio source – your computer, TV, integrated amp, turntable, etc – and connect the W3 Receiver to any input on your stereo, powered speakers, or subwoofer and in seconds you’ll have wired-quality wireless sound.
- EXTENDED-RANGE WIRELESS THAT WORKS – INTERFERENCE-FREE ZONE: Hear all your music without any dropouts, static, or noise. Some very clever engineering means your music remains free from interference from wifi routers, phones, and other wireless devices.
- BEST SUBWOOFER PLACEMENT – BETTER SOUNDING BASS: Finally eliminate that long audio cable from your AV receiver to your sub. W3 gives you the freedom to rock your subwoofer where it sounds and looks best.
- Advantages of wireless: The W3 wireless system transmits bit-perfect PCM-stereo simultaneously to up to 3 receivers. Because the USB controller in the Sender and the DAC in the Receiver are segregated by the wireless subsystem, various anomalies which plague many wired DACs such as jitter, grounding, and induced cable noise are greatly reduced. In addition, the W3 allows the user to physically isolate a potentially noisy computer from the sensitive audio components in your system.
- W3 USB: The W3 utilizes the TI CC8520 PurePath™ USB wireless system-on-a-chip solutions, TI’s newest offering to the wireless audio arena. The Sender can be powered directly from the USB bus or from the included external power adapter.
- W3 DAC: The W3 Receiver utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3 presents impressive low noise and low distortion characteristics.
SPECIFICATIONS
- DAC type: Dual mode USB and analog (via CS5343 ADC) wireless DAC
- Inputs: USB audio, mini-jack analog
- Outputs: analog mini-jack
- DAC: CS4344
- ADC: CS5343
- Full scale output: 1.0Vrms
- Output impedance: 470 ohms
- Power source:
- Sender: USB from computer or adapter
- Receiver: USB power adapter
- Power requirements:
- Sender: 180mA, 5V
- Receiver: 150mA, 5V
- SNR: 95dB
- THD+N: 0.01%
- Crosstalk: –65dB
- Frequency response: 20Hz to 20KHz, +/- .2dB
- Input bit depth: up to 16 bits native
- Input sample rate: up to 48KHz native
- USB device class: type 1.1 or above
- Wireless operation range: Up to 100ft (30m) typical
- Latency: <20ms
- Receivers supported: up to 3
- Product dimensions: 100×30×10mm (LxWxH)
- Shipping weight: 1 lb
- Included accessories: minijack cable (20″), minijack to RCA adapter (12″), USB power adapter
- Environmental:
- Operating Temperature: 32 to 95 degrees F
- Non-operating Temp: –4 to 113 degrees F
- Relative Humidity: 5% to 95% non-condensing