The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo
adds 4 AHCI SATA III ports to a computer through a PCIe slot (x2), delivering
multiple internal 6Gbps connections for high-performance hard drives and Solid
State Drives (SSDs).
Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which
lets you balance the performance advantages of SSD storage with the
cost-effectiveness and large capacity of standard hard drives. By combining SSD
and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly
works in the background to identify and move frequently accessed files to the
faster SSD drive(s) for improved data throughput – up to 80% of SSD
performance! (Note: The HyperDuo automatic storage tiering feature is compatible
with computers that use a BIOS.)
The PCIe SATA controller card supports Port Multiplier (PM), enabling
multiple SATA drives to be connected to one port over a single cable, for a
total of 7 drives (Up to 4 drives through PM on one port, and a single drive
to the remaining 3 ports). Plus, the SATA controller card offers an effective
hardware RAID solution, with native RAID (0, 1, 1+0) support.
Applications
- Use SSD tiering to optimize your system for I/O intensive applications such
as Office Suites, Photo/Video Editing and Media Players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better
utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional
storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID
1 capability
- Perfect for multi-drive internal RAID storage solutions
Specifications
HARDWARE
- Bus Type PCI Express
- Card Type Standard Profile (LP bracket incl.)
- Chipset ID Marvell – 88SE9230
- Industry Standards PCI Express 2.0, Serial ATA 3.0 specification
- Interface: SATA
- Port Style: Integrated on Card
- Ports: 4
PERFORMANCE
- ATAPI Support: Yes
- Bootable: Yes
- Hot Swap Capability: Yes
L* BA support: 48-bit
- Max Drive Capacity: Currently tested up to 4TB per drive
- Number of Drives Supported Through Port Multiplier: 1 to 4
- Number of Ports That Support Port Multiplier: 4 (can only use 1 PM at
a time)
- Port Multiplier: Yes
- RAID: Yes
- Supported RAID Modes: JBOD – (Just a Bunch of Disks), RAID 1 (Mirrored
Disks), RAID 0 (Striped Disks), RAID 10 (1+0, Striped set of Mirrored
Subset)
- Type and Rate: SATA III (6 Gbps)
CONNECTOR(S)
- Connector Type(s): 1 – PCI Express x2 Male
- Internal Ports: 4 – SATA (7 pin, Data) Plug
SOFTWARE
- OS Compatibility: Windows® XP, Vista, 7, 8, 8.1, 10 / Windows Server®
2003, 2008 R2, 2012, 2012 R2, 2016 / Mac OS® 10.6 to 10.14 / Linux 3.5.x to
4.11.x LTS versions only
SPECIAL NOTES / REQUIREMENTS
- Note: The maximum throughput of this card is limited by the bus interface.
If used with PCI Express Gen 1.0 enabled computers, the max throughput is
2.5 Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max
throughput is 5 Gbps per lane.
- Only one port can use the Port Multiplier feature at a time. Supports up to
4 drives connected via Port Multiplier, 7 drives total.
- Port Multiplier not supported in Mac OS.
- Note: Connected drives cannot be used as System / Primary drive in Windows
Server 2012, 2012 R2, 2016
- System and Cable Requirements: Available PCI Express x2 slot (backward
compatible with x4, x8, and x16 slots)
ENVIRONMENTAL
- Humidity: 20% ~ 80% RH
- Operating Temperature: 5°C ~ 50°C (41°F ~ 122°F)
- Storage Temperature: –25°C ~ 70°C (-13°F ~ 158°F)
PHYSICAL CHARACTERISTICS
- Product Height: 0.8 in [20 mm]
- Product Length: 2.8 in [70 mm]
- Product Weight: 1.7 oz [49 g]
- Product Width: 4.7 in [120 mm]