INSTALL TWO M.2 SSDS INTO A 2.5” BAY TO CREATE HIGH-PERFORMANCE STORAGE WITH CONFIGURABLE RAID
Boost your system performance by enhancing the capacity, speed and security of your data storage. This two-drive M.2 to SATA adapter lets you install two M.2 solid-state drives in a single 2.5” drive bay and configure a powerful RAID array.
FEATURES
- Install two M.2 NGFF SSDS into a single 2.5" SATA bay and build a powerful RAID array
- supports RAID O, RAID 1, spanning, or JBOD
- Add M.2 SSD performance to any computer system by converting M.2 to SATA
- protect your M.2 (NGFF) SSDS in any 2.5in application with enclosed housing
- Supports TRIM to help ensure stable performance of your M.2 SSDS
- Supports SATA 1/11/111 (up to 6Gbps) 2.5in SATA form factor housing
- Broad compatibility with support for the most common SATA M.2 SSDS (2230, 2242, 2260, 2280)
- Not compatible with M.2 NVMe or AHCI PCI-Express SSDS
- Add data redundancy to your system, by adding a mirrored SSD (RAID 1)
- Increase the storage capacity of your system by adding an additional SSD in a RAID array (RAID 0/BIG)
- Turn two unused M.2 drives into a regular 2.5in SATA solid-state drive
- Retrieve/backup data from an M.2 (NGFF) drive using a standard SATA computer
- Use M.2 drives in any 2.5 in. SATA application
Build a RAID array to enhance system performance
The dual M.2 to SATA adapter supports multiple RAID modes (RAID 0, 1, BIG)
helping you to achieve greater SSD capacity or data redundancy, depending on
your selected RAID mode. The SSD adapter also supports non-RAID operation (JBOD)
when paired with a port-multiplying SATA controller, so both drives can be used
independent of one another.
Maximize file transfer speeds
The dual SSD adapter lets you utilize the full potential of your SATA III
controller. Using M.2 SSDs in place of a platter drive reduces your data
transfer bottlenecks and gives you file transfer speeds of up to 6 Gbps.
M.2 SSDs also save you money by reducing your power consumption over regular
platter drives.
The M.2 NGFF SATA RAID adapter also provides TRIM support to enhance the stability and performance of your M.2 NGFF SSDs.
Get dependable drive protection
The M.2 to SATA adapter features an enclosed housing that helps protect your
NGFF (Next Generation Form Factor) SSD. The added protection gives you peace of
mind when you are using your M.2 drives in applications that require an added
level of durability such as hot-swap drive bays, or external SATA docking
stations.
The 25S22M2NGFFR is backed by a StarTech.com 2-year warranty and free lifetime technical support.
SPECIFICATIONS
- Warranty Information:
- Warranty: 2 Years
- Hardware:
- Chipset ID: ASMedia – ASM1092R
- Compatible Drive Types: M.2 (SATA, B-Key, NGFF)
- Drive Installation: Fixed
- Drive Size: 22m – M.2 NGFF
- Interface: SATA
- Number of Drives: 2
- Supported Drive Height(s):
- 2230
- 2242
- 2260
- 2280
- Performance:
- General Specifications: Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
- In order to see multiple drives in JBOD mode, your computer’s SATA controller must also support Port Multiplier.:
- Maximum Data Transfer Rate: 6Gbps
- MTBF: 500000
- Port Multiplier: Yes
- RAID: Yes
- Supported RAID Modes:
- RAID 0 (Striped Disks)
- RAID 1 (Mirrored Disks)
- JBOD – (Just a Bunch of Disks)
- BIG (Spanning or Concatenation)
- Type and Rate: SATA III (6 Gbps)
- Connector(s):
- Drive Connectors: 1 – SATA Data & Power Combo (7+15 pin) Female
- Host Connectors: 2 – M.2 (SATA, B-Key, NGFF) Male
- Software:
- OS Compatibility: OS independent; No software or drivers required
- Indicators:
- LED Indicators: 2 – Drive Error
- Environmental:
- Humidity: 5% ~ 95% RH
- Operating Temperature: 0°C to 50°C (32°F to 122°F)
- Storage Temperature: –10°C to 85°C (14°F to 185°F)
- Physical Characteristics:
- Color: Black & Silver
- Material: Steel and Plastic
- Product Height: 0.3 in [8 mm]
- Product Length: 3.9 in [99 mm]
- Product Width: 2.8 in [70 mm]
- Weight of Product: 1.9 oz [55 g]
- Packaging Information:
- Package Height: 1.2 in [31 mm]
- Package Length: 6.5 in [16.5 cm]
- Package Width: 5.2 in [13.1 cm]
- Shipping (Package) Weight: 4.2 oz [118 g]
- What's in the Box:
- Included in Package:
- 1 – dual M.2 NGFF SATA RAID adapter
- 2 – M.2 drive mount hardware
- 4 – screws
- 1 – mini screwdriver
- 1 – quick start guide