TP-LINK CPE520 5GHz 300Mbps 16dBi Outdoor CPE

TP-LINK's 5GHz 300Mbps 16dBi Outdoor CPE, the CPE520 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE520 an ideal choice for both business and home users.

Features

• Built-in 16dBi 2×2 dual-polarized directional MIMO antenna
• Adjustable transmission power from 0 to 27dBm/500mw
• System-level optimizations for more than 20km long range wireless transmission
• TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
• Centralized Management System – Pharos Control
• AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
• Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Specifications

Hardware

• Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
• Memory: 64MB DDR2 RAM, 8MB Flash

Interface:

• 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
• 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
• 1 Grounding Terminal
• 1 Reset Button
• Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; –7,8pins)
• Voltage range: 16–27VDC
• Dimensions (W X D X H): 11×3.1×2.4 inch (276×79×60mm)
• Power Consumption: 14 Watts Max
• Note: When deployed using Passive PoE, the power drawn from the power source

will be higher by some amount depending on the length of the connecting cable.

• Antenna Type: Built-in 16dBi 2×2 Dual-polarized Directional Antenna
• Beam Width: 45° (H-Plane) / 30° (E-Plane)
• Note: For more details, please refer to datasheet
• Protection:15KV ESD Protection, 6KV Lightning Protection

Enclosure:

• Outdoor ASA stabilized plastic material
• IPX5 waterproof Certification

Wireless

• **Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
• **Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)

Wireless Speeds:

• Up to 300Mbps (40MHz,Dynamic)
• Up to 144.4Mbps (20MHz,Dynamic)
• Up to 72.2Mbps (10MHz,Dynamic)
• Up to 36.1Mbps (5MHz,Dynamic)
• Frequency: 5.15~5.85GHz
• Note: Available operating frequency may vary depending on the

limitations of the countries or regions in which the device is used.

• Transmission Power: 27dBm/500mw (Adjustable power by 1dBm)
• Note: Maximum transmission power may vary across different channels depending

on the limitations of the countries or regions in which the device is used.

Software

Wireless Configurations:
Pharos MAXtream TDMA Technology
802.11a/n Modes

• Selectable Channel Width: 5/10/20/40MHz
• Automatic Channel Selection
• Transmission Power Control
• Dynamic Frequency Selection (DFS)
• WDS Enable/Disable
• **Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
• SSID Broadcast Enable/Disable
• Multi-SSID with VLAN Tagging (AP mode only)
• Distance/ACK Timeout Setting
• Wireless MAC Address Filter

Wireless Advanced:

• Beacon Interval/RTS Threshold/Frag­mentation
• Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Management:

• Discovery and Remote Management via Pharos Control application
• HTTP/HTTPS Web-based management
• System Log
• SNMP Agent(v2c)
• Ping Watch Dog
• Dynamic DDNS
• SSH Server

System Tools:

• Wireless Signal Quality Indicators: Signal Strength/Noise/Tran­smit CCQ/CPU/Memory
• Monitors: Throughput/Sta­tions/Interfa­ces/ARP/Routes/WAN/DHCP
• Spectrum Analyzer
• Speed Test
• Ping
• Traceroute

System-level Optimizations:

• Optimized IGMP Snooping/Proxy for multicast applications
• Hardware watch dog

PoE Adaptor

Interfaces:

• 1 AC Jack with Earth Ground
• 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)
• 1 10/100/1000Mbps Shielded Ethernet Port (Data)
• **Efficiency: >80%
• **Button: Remote Reset Button
• **Certifications: CE/FCC/UL/IC/­GS/PSB/C-tick/SAA/S-Mark/KC-mark
• Power Status LEDs: 0~0.8A: Green, 0.8A~1.0A: Red

Output:

• 24VDC, 1.0A Max
• +4, 5pins; –7, 8pins. (Support up to 60m Power over Ethernet)
• Input Voltage; 100VA~240VAC @ 50Hz~60Hz
• Dimensions(W x D x H): 110×57×33.5mm
• Input Current: 0.8A Max @ 100VAC
• Input: 100–240VAC, 50/60Hz
• Output Voltage: 24VDC(+4,5pins; –7,8pins)

Other
Certification: CE, FCC, RoHS, IPX5

Package Contents:

• Outdoor Wireless CPE
• 24V 1A Passive PoE Adapter
• Pole Mounting Straps
• AC Power Cord
• Installation Guide

System Requirements:

• Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8,

Windows 7, MAC OS, NetWare, UNIX or Linux.

• Note: We recommend you to use one of following Web browsers for an improved user

experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

Environment:

• Operating Temperature:** –30°C~70°C (-22?~158?)
• Storage Temperature:** –40°C~70°C (-40?~158?)
• Operating Humidity:** 10%~90% non-condensing
• Storage Humidity:** 5%~95% non-condensing