ChemTools 8480 Cyanoacrylate Adhesive - Medium Viscosity, Black Rubber Toughened
Tough Instant Adhesive 8480 - Metal to Metal, ideal for bonding rubbers, magnets, metals and plastics.
Cyanocrylate adhesives offer a major advantage over other types of adhesive systems. They are a single componentadhesive, fast curing at room temperature, solvent free and resistant to many environmental factors.
ChemTools 8480 is medium viscosity combined with fast cure speed, and excellent resistance to peel and shock loads. It is specially formulated to bond various Rubbers, Metals and Plastics for use in difficult environments.
One part adhesive
Solvent free
Fast curing at room temperature
High Tensile shear strength
APPLICATIONS:
Ideal for bonding Rubbers, Magnets, Metals and Plastics.
Ideal for Speaker Assemblies, Automotive Parts, Electronic Components, Electrical Parts, Computer Assemblies, Disk Drives, etc.
PHYSICAL PROPERTIES
Liquid
Composition Rubber Toughened Ethyl Cyanoacrylate
Appearance Black liquid
Viscosity 300 cps
@ 25 °C, Brookfield RTV
Flash Point (TCC), °C > 93
Specific Gravity @ 25°C 1.1
Typical Cure Speed - Substrate Fixture Time, (Seconds)
Neoprene Rubber 12 – 22
Nitrile Rubber 12 – 22
SBR Rubber 15 – 25
Steel 60 – 100
Aluminum 10 – 25
Phenolic Materials 10 – 50
Polycarbonate 30 – 80
Cured Adhesive
Gap Filling 0.3mm
Tensile Shear Strength 13-28 n/mm2
Service Temperature Range -60 to +80°C
Full Cure 24 hours
Melting Point Temperature 160 to 170°C
Mechanical Properties:
Glass transition temperature, °C 150
Coefficient of thermal expansion, ASTM D696, K-1 80x 10-6
Coefficient of thermal conductivity, ASTM C177 W.m-1K-1 0.1
All surfaces must be clean, dry, dust and grease free. Best result will be achieved with surfaces that have been lightly abraded immediatelyprior to bonding.
If using accelerator apply to one component surfaceonly. Apply thin film of adhesive to the other surface and bring the pieces together immediately. Hold for few seconds without disturbing the joints.
When bonding “O” rings, cut a fresh surface onto each end of the rubber to gain the best possible strength.
Specifications
General
Chemical CompositionEthyl Cyanoacrylate
TypeChem Tools
Warranty & Returns
This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.
All products sold by third-parties are subject to the Customer Charter and comes with guarantees that cannot be excluded under the Australian Consumer Law.
