24V DC, 1.5 Amp switch mode plug pack supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. Dimensions: 49W x 85H x 41D mm.
Features
Australian standards compliant
Suitable for a range of electronic devices
Compatible with Australian mains power point
Rated input voltage: 100 - 240Vac
Operating range: 90 - 264Vac
Rated input frequency: 50/60Hz
Variation Frequency: 50/60Hz +/ - 3Hz
Rated input current: 0.8A Max.
Primary current protection: An adequate internal fuse on the AC input line is provide
Power consumption (no loading): 0.1W Max. (Input voltage 115V and 230V)
Configuration: II Conductor
AC Leakage Current: 0.25mA Max.At240Vac input
DC output voltage: 24V
Minimum load current: 0.01A
Rating load current: 1.5A
Rating output power: 36W
Line regulation: The line regulation is less than ±5% while measuring at rated load and +/ - 10% of input voltage changing.
Load regulation: The load regulation for +12V is less than ±5%, at measured output load from 0% to 100% rated load
Temperature: Operating: 0°C +40°C, Non - Operating: - 20°C +80°C
Plug tip type: 5.5mm outer diameter and 2.1mm inside diameter
Polarity: Positive centre
Cable length: 1.8m
MEPS efficiency level: VI
Specifications
General
TypeAdapter
Voltage24V DC
Warranty & Returns
This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.
All products sold by third-parties are subject to the Customer Charter and comes with guarantees that cannot be excluded under the Australian Consumer Law.
