6 Line input sources, including 3xRCA, 2xStereo 3.5mm,and 1x S/PDIF
Provides 6 output zones connecting with various power amplifiers for different purposes of applications
Keypad controls each output zone for selecting the source, volume, treble, bass, and soundtrack via the hub
Enable control over Ethernet TCP/IP via the PC or freemobile APP, supported by Apple IOSAPP store and Andriod Google Playstore
Dual LAN Ethernet RJ45 ports, one for the wired connection to the local network features an ethernet switch built-in, the second one can connect with the smart TV or other devices
RS232 and Ethernet control switchable
RS232 port allows 2-way communication with the Home Automation system
Built-in IR receiver & IR remote controller
6 Individual 12V DC trigger output to an external device when the zone is activated
Expandable up to 18 Zones by additional 2 units of MAP1200PRE with the supplied ribbon cable, easy to identify the unit via the Master/Salve switch
6 LEDs for 6 zones status of Power On (white), Standby(blue), and Mute (blue/white)
AGC Automatic gain control to bring low level up to a present level
Built in 2 of the IR emitter outputs to control the connected devices
Rack-mountable
SpecificationsSpecifications
S/N: -110dB
THD: 0.05% (1V)
Frequency Response: 20Hz – 20KHz (-0.5dB)
Input Impedance: >47 K Ohms
Input Sensitivity: 1V
Crosstalk: -75dB (@1kHz)
Output Impedance: 100 Ohms
Output Level: 3V
Trigger Out Voltage: DC + 12V
Infrared Frequency: 38kHz
Input Connectors: RCA, 3.5mm stereo, OPTICAL
Output Connectors: Terminal Block
Network Connector: RJ-45, Standard 10/100Mb
Power Supply: DC 15V/1.6A
Power consumption: 24 W, Max.
Dimensions: 440 mm x 44 mm x 196 mm (WxHxD)
Weight: 2Kgs
Package contents
MAP1200PRE main unit x1 pc
Rackmount ears x2 pcs (installed on the unit)
Terminal blocks x12 pcs (installed on the unit)
User manual x1 pc
15V 1.6A DC Power supply x1 pc
Keypad and decora wall plate and screws x6 sets
Keypad hub and decora wall plate and screws x1 set
IR remote control x1 pc
Remote control battery x1 pair
Expansion ribbon cable x1 pc
FAQ
Q: How to find the IP address of the unit when connected to the router?
A: The unit defaults to DHCP ON. When it connects to the router, it will automatically obtain the IP address assignedby the router.
Few ways to find the IP address of the unit,
Log in to the router, check the connected devices, looking for the name of MAP-1200PRE;
Download “Advanced_IP_Scanner” software to find the IP address;
Find the IP address from the mobile APP, if it has connected to the MAP1200PRE.
Specifications
Warranty & Returns
This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.
All products sold by third-parties are subject to the Customer Charter and comes with guarantees that cannot be excluded under the Australian Consumer Law.
