100CC Motorized Push Bike Kit Motorised Bicycle Petrol Gas Motor Engine kit 2 Stroke

Please be advised due to higher shipping cost $30 extra will be charged for customers from: NT, WA with postcode greater than 62XX, and QLD with postcode greater than 48XX

• This kit will allow you to turn your bicycle into a gasoline powered motorbike
• 1 Gallon of fuel runs 150 miles
• The engine is designed to be pedal/chain started so you can start or stop the engine while riding
• Speed up to 40mph.

• Engine Type: 2 stroke Single Cylinder Air-Cooled
• Rated Power Rotary Speed: 2.5Kw/5000Rpm
• Max Power: 3.5Kw/6000Rpm (5-6 Horsepower)
• Fuel Ratio: 15:1 for the first 3 tanks ,25:1 after that
• Ignition: CDI
• Start: Pedal Start
• Tank Size: 2 Litres
• Fuel Consumption: 2.5L/100Km
• Top Speed : 55Km/Hr. Depends on rider’s weight and road condition.
• Type Of Clutch: Dry Friction Pate
• Fuel : Unleaded PETROL Mixed with high grade 2 stroke motorcycle oil
• Start : Pedal

• 1 × Spark Plug
• 1 × Chain Guard
• 1 × Chrome Muffler
• 1 × Drive Chain Idler
• 1 × Push Clutch Lever
• 1 × Chain
• 1 × 80CC 2-Stroke Engine (Silver)
• 1 × CD Ignition Assembly
• 1 × High Quality Main Bearings
• 1 × Black Teardrop Gas Tank (2L)
• 1 × Low Profile Carburetor Assembly
• 1 × Magneto With Kill Switch (on throttle)
• 1 × 44 Tooth Chrome Sprocket With 9 Holes
• 1 × Twist Throttle And Cable With Matching Grip
• 1 x U Shape Mounting Bracket

• Kit only – bicycle not included.
• Bicycle installed with 80cc engine kit is not legal to be used on road /bicycle path in Victoria – please check with local authority for other states. It is recommended for off-road or private property use only.
• Not suitable for Bike with front frame wider than 50mm
• Always wear a suitable helmet when riding. Not suggested for night use. If unavoidable, please make sure adequate lighting system is operating at night
• Professional installation suggested , to install this kit you will need certain skills and tools. Please check the frame guide before purchase
• Please note that this engine is the new generation, there are a small screw in the package which can be screwed straight on the arm of lock, no longer brass bit needed
• Use only high -grade 2 stoke motorcycle oil to ensure proper engine lubrication