SRNE VOLTX MPPT Solar Charge Controller Makes Your Energy Management More Efficient!

Features:

[Advanced Maximum Power Point Tracking] This serie controller adopts the industry-leading MPPT which tracking efficiency up to 99.9% to achieve the maximum energy trackingfor the solar panel, that is, it can quickly and accurately track the maximum power point of the solar battery on any condition.

[Temperature Sampling and Control] Fitted with a Remote Temperature Sensor, the MPPT Charge Controller can measure battery temperature in real-time. Connect the temperature sensor to the corresponding temperature interface to achieve the high and low temperature protection for the battery and the temperature compensation for the charging voltage of lead-acid battery (no temperature compensation for the lithium battery) , assuring stable and constant charging.

[Support TTL & RS485 & CAN & Bluetooth Communication] MPPT solar charge controller has powerful TTL and RS485 communication protocol function. By connecting the controller with other devices, you can easily obtain the status information of the charger, adjust battery charging parameters, etc. and under the Bluetooth Communication you can view fault status through the mobile app.

[Intelligent Protection Functions] MPPT provides multiple protection functions: Over-temperature protection of device, Battery over-temperature protection, Input over-power protection, PV input side too high voltage protection, PV input reverse-connection protection, Reverse charging protection at night.

[Max. Solar Input Power 12V/400W 24V/8000W] The MPPT charge controller can work with standard off-grid 12/24V solar panels. In particular, this controller will significantly increase the efficiency of a solar system where the solar panel voltage is much higher than the battery voltage.

Electrical Parameters

Static power consumption: ≤30mA

Battery Type: USE/FLD/GEL/LI/SLD ( Default)

System voltage: 12V/24V

Battery’s operating voltage range: 8V-32V

Rated charging current: 30A

Maximum PV Input Current: 27A

Maximum solar panel power: 400W/12V; 800W/24V

Maximum PV open-circuit voltage: 150V

MPPT operating voltage point range: (Battery Voltage +2)~110V

MPPT tracking efficiency: >99%

Charging conversion efficiency: 85%-98% (10%-100% of rated power)

Rated load current: 30A

Load operating mode: Pure light-dependent control, light and time-dependent control, manual mode (default), debugging mode, normally opened.

TTL communication: Baud Rate 9600kps

RS485 communication: One isolated RS485 communication port, with power output of 5V200mA, baud rate of 9,600kps by default and adjustable.

Bluetooth communication: Built-in

CAN communication: RV-C Protocol

Historical data: Can store historical data of the past 300 days

Protection function: PV Overvoltage Protection, PV Reverse Connection Protection, PV Short-Circuit Protection, Nighttime Reverse Charge Protection, Input Limited Power Protection, Overtemperature Protection, Load Short-Circuit Protection, Load Overload Protection, Battery Supervoltage/Over-discharge Protection, Battery Reverse Connection Protection and Battery Terminal Short-Circuit Protection.

Grounding type: Co-negative design and negative grounding

Cooling mode: Natural Cooling

Parallel connection for charging: No

Charging voltage line loss compensation: No

Support full settings: Yes

Constant voltage output setting: Yes

Charging temperature compensation of lead-acid battery: Yes

Temperature protection: Yes

Overload/short-circuit protection: Yes

Load pre-start: Yes

Environmental Data

Protection grade: IP32

Operating ambient temperature range: -35°C~ 65°C (no derating within 45°C if well ventilated)

Dimensions & Weight

Dimension: 260×216×83.2mm

Mounting hole spacing: 200 mm

Weight: 2.3kg

Fixed hole position: Φ10mm

Package List

1× 30A MPPT Solar Charge Controller

Tips for Bluetooth functionality:
Additional Bluetooth module is required to achieve Bluetooth functionality.

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.

All products sold by third-parties are subject to the Customer Charter and comes with guarantees that cannot be excluded under the Australian Consumer Law.